How to clean my Dummy the right way?

How to sterilize dummies

Part of good dummy hygiene is frequent cleaning of the dummies. The younger the child, the more important it is to protect it from bacteria and to maintain good dummy hygiene.

Before first use

Before first use (when you take the dummy out of the packaging), sterilize the dummy by putting it in plenty of boiling water for 5 minutes (like in a pot on the stove where the water will be boiling for the entire 5 min.) Remember to keep an eye on the water level when boiling so that the shield does not burn on the pot. This only applies before first use.

When cleaning the dummy subsequently, follow these three simple steps:

  • Put the dummies in a clean bowl. Pour them with plenty of boiling water.
  • Let the dummies soak for approx. 5 min.
  • Pick them up and let them dry on a clean towel.

    TIP: When the child is over 3 months, you can also rinse the dummy by placing them in a sieve and pouring them with boiling water. This method is faster and avoids water collecting inside the nipple.

    After cleaning it is not unusual that water remains in the nipple. This is due to the fact that all our dummy nipples are equipped with a valve, letting out air when the baby closes down on the nipple. This ventilation system causes the air from inside the nipple to be pushed out through the valve thereby flattening the nipple to shape naturally after the baby's oral cavity. The valve is also the reason why water can be present inside the nipple after cleaning and sterilization. If this is the case, simply just squeeze the nipple flat to press out the excess water. If water drops remain in the nipple, just let the dummy air-dry.

    Natural rubber latex can in rare cases smear off to the shield, so it is important to scald in plenty of water and not too many dummies at a time.

    Do not cook!

    Dummies are not meant to be boiled and are therefore destroyed by the high heat. Instead, follow the instructions above, and you are sure to kill the bacteria without compromising the durability of the dummy.

    Don’ts

    • Do not leave natural rubber latex dummies in direct sunlight.
    • Do not put the dummies in the dishwasher.
    • Do not use UV or steam sterilizers for the dummies.
    • Do not freeze the dummies.

    How often should I clean the dummies?

    Part of good dummy hygiene is frequent cleaning of the dummies. The younger the child, the more important it is to protect it from bacteria and to maintain good pacifier hygiene. This is mainly because small children’s immune system has not yet managed to get acquainted with all the different bacteria, and therefore it will not have learned to “defend” against them yet.

    Premature infants and babies up to 3 months need more thorough and frequent cleaning than babies over 3 months of age. Therefore, the dummy must be cleaned more often when the child is under 3 months. We always recommend that dummies are scalded at least once a day.

    Do not use UV sterilizers for latex dummies

    Since natural rubber latex is a natural material it undergoes a natural aging process, which can be influenced by external forces such as UV light. Therefore, never use a UV sterilizer for our BIBS latex dummies as it will damage the material.

    Do not use steam sterilizer devices for latex dummies

    There are two reasons why we do not recommend stream sterilizer devices:

    1. We have not tested our dummies in all these different devices and cannot guarantee that the latex will not break due to the high temperatures.
    2. Latex will break down if the temperature exceed 100°C. To use steam sterilizers people need to check the manufacturer’s instructions for the sterilizer in relation to heat and watts, to make sure the temperature does not exceed 100°C.

    Do not use sterilizing solution for latex dummies

    We do not recommend using sterilizing solution for latex dummies, as the solution can damage the latex if the dummy is left in for longer than recommended.

    Do not use dishwasher cleaning

    Do not clean the dummies in a dishwasher. The cleaning agents will damage the material (both latex and silicone) and it can become brittle. Furthermore, most dishwashers do not reach temperatures high enough to sufficiently sterilize the dummies.

    What about microwave sterilization?

    Be aware that latex will break down if the temperature exceed 100°C. Silicone endure higher temperatures than latex, however our general recommendations are that to use microwave sterilizations you must check the manufacturer’s instructions in relation to heat and watts, to make sure the temperature does not exceed 100°C. In most microwaves the dummies must be heated for a maximum of 60 seconds at max. 800W. Otherwise temperatures will exceed 100°C.

    NB: Always check the manufacturer’s instructions! And always remember to put the dummies in water in a sterilization box made for the purpose. Never place the dummies in the microwave without!

    Leave a comment